Product Center

Factory cheap price welded gabion basket

1. Description:

Welded Gabion are manufactured from cold drawn steel wire and strictly conform to

BS1052:1986 for tensile strength. It is then electrically welded together and Hot Dip Galvanised

or Alu-Zinc coated to BS443/EN10244-2, ensuring a longer life. The meshes can then be organic polymer coated to safeguard against corrosion and other weathering effects, especially when the are to be used in salty and highly polluted environments. Our Alu-Zinc* mesh is coated using the Galfan process.

  Lacing wire shall be provided separately for site assembly. Lacing Spirals is  Alu-Zinc and stainless steel C rings are also available at extra cost if required.

   All our Organic Polymer powder coated welded mesh are designed to be equivalent to the requirements of the DETR, HA MCHW, Volume 1 Specification of Highway Works, Clause 626.

  It is composed of welded mesh panel and spring steel lacing wire.

3. Features:

1. Just fill the stone into the gabions and seal it.
2. Simple installation. No special technology needed.
3. Weather proof under natural destroy, corrosion resistant.
4. Sludge in the stones is good for plant growing. Mixed to form a integrity with the natural environment.
5. Good permeation can prevent the damage by hydrostatic.
6. Less transport freight. It can be folded together for transport and further installation.
7. No collapse even under big scope of deforming.

4. Specification: 

Note:

1.) The above tolerance comply with standard EN10223-2:1997; 
2.) Minimum Galvanization is only for typical wire diameter as stipulated separately in the column for your reference; 

6. How to install welded gabion mesh? 

Step 1. Ends, diaphragms, front and back panels are placed upright on the bottom section of wire mesh. 

Step 2. Secure panels by screwing spiral binders through the mesh openings in adjacent panels.

Step 3. Stiffeners shall be placed across the corners, at 300mm from the corner. Providing a diagonal bracing, and crimped over the line and cross wires on the front and side faces. None are needed in interior cells. 

Step 4. Gabion box is filled with graded stone by hand or with a shovel. 

Step 5. After filling, close the lid and secure with spiral binders at the diaphragms, ends, front and back. 

Step 6. When stacking tiers of the welded gabion mesh, the lid of the lower tier may serve as the base of the upper tier. Secure with spiral binders and add pre-formed stiffeners to exterior cells before filling with graded stones. 

7. Welded Gabion boxes applications:

8. Our Certificate